Kmc-controls MCP-8031 Series Manuel d'utilisateur télécharger pdf

Installation Guide

Damper Actuators for Terminal Boxes

MCP-8031 Series

Mounting

1. Connect the damper’s blade clip or drive arm

with the clevis pin and cotter pin.

2. Position the damper for its “normal” position.

3. Mount the actuator to the side of a VAV

terminal using the mounting holes in the

bracket.

4. Rotate actuator body so the air connection is in

the desired location.

5. Check that the linkage will not bind as the

shaft extends and retracts.

Connections

♦ Use 1/4" (6 mm) polyethylene tubing.

♦ Use only clean, dry control air. No attempt

should be made to use any other medium.

1. Pipe the signal (0 to 20 psi) to the input fitting.

2. Slowly apply supply pressure to fully stroke

the actuator and linkage.

3. Check for any binding.

Adjustments and Calibration

Fine tuning can be accomplished by adjusting the

balljoint on the pushrod.

Maintenance

The MCP-8031 actuator is designed for long term

reliability. No routine maintenance is required.

KMC Controls

19476 Industrial Drive

New Paris, IN 46553

574.831.5250

www. kmccontrols.com

002-019-01I

Installation Guide 1

Résumé du contenu

Page 1 - Installation Guide

Installation GuideDamper Actuators for Terminal BoxesMCP-8031 SeriesMounting1. Connect the damper’s blade clip or drive armwith the clevis pin and cot

Commentaires sur ces manuels

Pas de commentaire

Kmc-controls MCP-8031 Series Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Kmc-controls MCP-8031 Series. KMC Controls MCP-8031 Series User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Kmc-controls MCP-8031 Series