Kmc-controls STE-1422 Manuel d'utilisateur Page 1
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Kmc-controls STE-1422. KMC Controls STE-1422 User Manual Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
STE-1421/1422 1 Installation Guide
Installation Guide
Contents
Mounting and Wiring 1
Accessories 2
Specifications 2
Maintenance 2
Configuration 2
More Information 2
Important Notices 2
Mounting and Wiring
Immersion probes measure the temperature inside
pipes carrying liquid or steam and are installed in a
304 stainless-steel thermowell. Mount the thermow-
ell horizontally or with the open end facing down
(to allow any condensation to drain). Position the
thermowell to prevent contact with the inside of the
pipe.
1. Installthepipeingsrequired,bylocalcode,
for a thermowell into the dry/drained pipe. If the
systemispressured,useahottap.
2. Install the thermowell. (See the Accessories
section.)
3. Fill the well with thermal compound to ensure
complete conductivity from well to probe.
NOTE: The probe can slide within its collar on the
case as it is inserted into the thermowell.
4. Remove the screws holding the cover to the case
and remove the cover.
5. Insert the probe into the well and tighten the
threaded connection on the case.
6. Frominsidethecase,pushtheprobeasfarasit
will go into the well.
7. Feed the thermistor wire leads through the
conduit or hole opening.
8. Connect the thermistor wires to the cable with
bu-splicesorsoldering.(Wirenutsarenot
recommended.) The two-wire sensor is not
polarity sensitive.
9. Reinstall the cover and screws.
Thermowells Installed
ABS Enclosure
Metal Enclosure
4.56"
115.8 mm
3.320"
84.3 mm
Various Probe
Lengths
Ø 0.850"
0.25"
6.35 mm
304 Series S/S Probe
1/2" NPT
4.24 “
107.7 mm
Various Probe Lengths
8X Ø 0.875”
2.04
51.8 mm
4.0 “
101.6 mm
0.25 “
6.35 mm
304 Series S/S Probe
1/2” NPT
2.10 “
53.3 mm
0.875 “
22.2 mm
2.110"
53.6 mm
0.875"
22.2 mm
Temperature Sensor, Immersion
STE-1421/1422
1
2
Résumé du contenu
Page 1 - Contents
STE-1421/1422 1 Installation GuideInstallation GuideContentsMounting and Wiring 1Accessories 2Specifications 2Maintenance 2Configuration 2More Inform
Page 2 - 0.25"
STE-1421/1422 2 Installation Guide© 2014 KMC Controls, Inc. 717-019-17EKMC Controls, Inc.19476 Industrial DriveNewParis,IN46553574.831.5250www
Produits connexes et manuels pour Capteurs Kmc-controls STE-1422
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.117 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels