Kmc-controls TPE–1464 Series(2004-2008) Manuel d'utilisateur télécharger pdf

Description

The KMC TPE–1464 series of pressure transducers

incorporate a gauge pressure transmitter featuring

low hysteresis, excellent repeatability, and long-

term stability.

Up to four field-selectable input ranges are available

in most models. The field selectable feature

provides a single model that can be configured to

cover all the input pressure ranges for any given

application.

Three output ranges are field selectable, 4 to 20mA,

0 to 5 VDC, and 0 to 10 VDC. The output signal is

factory calibrated and temperature compensated

for the highest start-up accuracy.

The TPE–1464 can be powered from either a 24

VAC nominal, or 12 to 30 VDC power source.

TPE–1464 incorporates a rugged NEMA 4

enclosure.

TPE–1464 Series

Pressure Transducer

Specifications and design subject to change without notice.

Models

The following models are available

TPE–1464–1 0 to 10/20/50/100 psig/d

TPE–1464–2 0 to 20/40/100/200 psig/d

TPE–1464–3 0 to 50/100/250/500 psig/d

Features

◆ Push-button and remote zeroing terminal

◆ Normal or slow surge damping switch to

prevent false alarms and reduce noise

◆ Output polarity reverse switch

Application

KMC TPE–1464 Pressure Transducers are suited for

any application requiring a reliable pressure

monitor providing a dependable conditioned and

compensated signal output.

The TPE–1464 may be used with any liquid or gas

that is compatible with 17–4 PH stainless steel.

DO NOT USE for these applications:

◆ Oxygen service

◆ Explosive/hazardous environments

◆ Flammable or combustible materials

Valid late 2004 into 2008—

see Rev. E of this data

sheet for information on the

new case and board.

1 2 3 4 5 6

Résumé du contenu

Page 1 - TPE–1464 Series

DescriptionThe KMC TPE–1464 series of pressure transducersincorporate a gauge pressure transmitter featuringlow hysteresis, excellent repeatability, a

Page 2 - Specifications

Page 3 - Installation Guide

Installation GuideGage Pressure TransducerTPE-1464 SeriesMountingAvoid locations with severe vibrations or excessivemoisture. The enclosure has a stan

Page 4

WiringUse 22 AWG shielded wiring for all connections. Do not locate device wires in the same conduit aswiring supplying inductive loads.1. Connect th

Page 5 - Set-Up Continued

RANGEThe input pressure range is set by moving the 4-position slide switch marked RANGE. Range and Optionsswitches can be changed while the unit is op

Page 6 - Maintenance

717-019-03KMC Controls19476 Industrial DriveNew Paris, IN 46553TEL: 574.831.5250FAX: 574.831.5252E-mail: [email protected] routine m

Commentaires sur ces manuels

Pas de commentaire

Kmc-controls TPE–1464 Series(2004-2008) Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Kmc-controls TPE–1464 Series(2004-2008). KMC Controls TPE–1464 Series(2004-2008) User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Kmc-controls TPE–1464 Series(2004-2008)